TM 9-2350-256-20-1
0123 00
Removal
1.
Remove lines and fittings as required using illustration as guide.
Repair or Replacement
1.
Clean and dry all lines and fittings.
2.
Inspect fuel lines for cracks, bends, twists, or flattened areas.
3.
Straighten slightly bent rigid fuel lines. Replace broken or badly bent fuel lines.
4.
Replace broken or badly bent flexible fuel lines. Replace frayed, cracked, or defective flexible lines. Replace damaged
fittings.
5.
Replace defective primary fuel filter (see WP 0129 00).
Installation
1.
Install lines and fittings in reverse order using illustration as guide.
NOTE
Follow-on maintenance: Install toolbox rack (see WP 0332 00); Install rear left-side intermediate
floor plate (see WP 0301 00); Install stowage basket center left floor plate (see WP 0299 00); Install
intermediate rear left-side floor plate (see WP 0298 00); Install rear center floor plate (see WP 0297 00);
Close fuel tank drain valves and fill fuel tanks or turn ON fuel shutoff valves (refer to TM 9-2350-256-
10).
0123 00-2
