TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
FUEL CONTROL VALVES AND ID PLATES REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Pins, spring (4) (item 448, WP 0491 00)
Pins, spring (16) (item 472, WP 0491 00)
Materials/Parts
Screw (item 415, WP 0491 00)
Tape, sealant (item 34, WP 0489 00)
Setscrews (4) (item 749, WP 0491 00)
Bushings (4) (item 49, WP 0491 00)
Washers, flat (5) (item 539, WP 0491 00)
Drivescrews (22) (item 501, WP 0491 00)
Washers, flat (4) (item 541, WP 0491 00)
Lockwashers (4) (item 639, WP 0491 00)
Lockwashers (2) (item 640, WP 0491 00)
Equipment Condition
Lockwashers (2) (item 642, WP 0491 00)
Powerplant removed (see WP 0098 00)
Nuts (4) (item 758, WP 0491 00)
Fuel tank drain valves opened and fuel tank drained,
Nuts (4) (item 768, WP 0491 00)
or fuel shutoff valves turned to OFF (refer to TM
Packings, preformed (4) (item 195, WP 0491 00)
9-2350-256-10)
Pins, shoulder (4) (item 48, WP 0491 00)
WARNING
Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe
injury or death.
NOTE
For installation purposes, parts indicated with an (*) need sealant tape.
0125 00-1
