TM 9-2350-256-20-1
0124 00
Installation
1.
Install controls in reverse order using illustration as guide.
Adjustment
1.
Loosen nuts (4 and 5).
2.
Pull fuel shutoff handle (1). Check that fuel shutoff control (22) turns to complete "OFF" position. Tighten nut (5).
3.
Push fuel shutoff handle (1). Check that fuel shutoff control (22) turns to "ON" position. Tighten nut (4).
4.
Start engine (refer to TM 9-2350-256-10).
5.
Check operation of engine fuel manual shutoff control. If control does not shut engine off when operated, repeat adjustment.
NOTE
Follow-on maintenance: Close fuel tank drain valves and fill fuel tank or turn on fuel shutoff valves
(refer to TM 9-2350-256-10).
END OF WORK PACKAGE
0124 00-3/4 blank
