TM 9-2350-256-20-1
0126 00
Installation
1.
Install bracket (18) with two flat washers (20) and two nuts (19).
2.
Install fuel check valve (5) with two screws (15), two lockwashers (16), and two flat washers (17).
3.
Install tee (12), bushing (14), filter (13), and coupling (9) to fuel check valve (5).
4.
Connect elbow (11) and fuel filter inlet tube (10) to tee (12).
5.
Connect manifold heater purge fuel line (8) to coupling (9).
6.
Connect fuel pump outlet hose (6) and adapter (7) to fuel check valve (5).
7.
Connect adapter (4) and elbow (2) to fuel check valve (5).
8.
Connect fuel inlet hose (1) to elbows (2 and 3).
Testing
1.
Turn MASTER switch and fuel pump switch to ON position.
2.
Purge fuel system (refer to TM 9-2350-256-10).
3.
Operate engine (refer to TM 9-2350-256-10). Inspect fuel check valve (5) and connections for leaks.
4.
Shut down engine. Turn MASTER switch and fuel pump switch to OFF position.
NOTE
Follow-on maintenance: Install engine deck (see WP 0336 00).
END OF WORK PACKAGE
0126 00-3/4 blank
