TM 9-2350-256-20-1
0127 00
Removal
1.
Loosen bleeder valve (1).
2.
Disconnect constant bleed line (2) and drain fuel into suitable container.
3.
Remove constant bleed line (2), filter (9), screw (10), clamp (11), nipple (12), lockwasher (13), and locknut (14).
4.
Disconnect fuel filter outlet hose (15) and fuel filter inlet hose (16) from primary fuel filter (8).
5.
Remove fuel filter inlet hose (16) with coupling (17) by removing screw (18), clamp (19), flat washer (20), and nut (21)
from bracket (22).
6.
Remove bracket (22) by removing nut (23).
7.
Remove two self-locking nuts (24), two screws (25), and primary fuel filter (8) from filter bracket (26).
8.
Remove filter bracket (26) by removing two screws (27) and two lockwashers (28).
9.
Remove elbow (29) and adapter (30).
Disassembly
1.
Loosen retaining screw (31) and lift off fuel filter head (4). Remove and discard filter head gasket (5).
2.
Remove retaining screw (31), flat washer (32), gasket (33), and nut (34) from fuel filter head (4). Discard gasket.
3.
Remove bleeder valve (1) from fuel filter head (4).
0127 00-4
