TM 9-2350-256-20-1
0127 00
4.
Remove and discard fuel filter element (6).
5.
Remove preformed packing (35), retainer assembly (36), and helical compression spring (37) from filter body (7).
Cleaning
WARNING
Solvents can burn easily, give off harmful vapors, and are harmful to skin and clothing. To avoid injury
or death, keep away from open flame and use in a well-ventilated area. If solvent gets on skin or clothing,
wash immediately with soap and water.
1.
Clean all parts with cleaning compound. Scrape off any accumulated sludge or gum. If necessary, dry parts.
2.
Check filter (9) for blockage. Filter orifice must be open.
3.
Replace discarded and defective parts.
Assembly
1.
Install helical compression spring (37) in filter body (7).
2.
Install preformed packing (35) on retainer assembly (36) and place both in filter body (7).
3.
Install fuel filter element (6).
4.
Install bleeder valve (1) in fuel filter head (4).
5.
Install flat washer (32), gasket (33), nut (34), and retaining screw (31) on fuel filter head (4). Install fuel filter head gasket
(5) in fuel filter head.
0127 00-5
