TM 9-2350-256-20-1
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
PURGE PUMP/HANDLE/LEVER MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Pins, cotter (3) (item 515, WP 0491 00)
Pins, straight (3) (item 708, WP 0491 00)
Materials/Parts
Screw (item 578, WP 0491 00)
Bushing (item 62, WP 0491 00)
Screw (item 776, WP 0491 00)
Lockwasher (item 621, WP 0491 00)
Screws (4) (item 800, WP 0491 00)
Lockwasher (item 637, WP 0491 00)
Lockwashers (4) (item 640, WP 0491 00)
References
Lockwasher (item 645, WP 0491 00)
TM 9-2350-256-10
Nut (item 688, WP 0491 00)
WARNING
Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe
injury or death.
NOTE
Push in manual fuel shutoff and turn fuel pump switch to OFF position to shut off fuel to purge pump.
NOTE
Push in fuel shutoff handle, start engine (refer to TM 9-2350-256-10), and check for leaks.
NOTE
Handle can be repaired without removing purge pump.
0122 00-1
