TM 9-2350-256-20-1
0120 00
4.
Remove upper filler tube (4) and gasket (5) by removing six screws (6), six lockwashers (7), and six nuts (8).
5.
Disconnect two air vent lines (9).
6.
Remove lower filler tube (10) and gasket (11) by removing six screws (12) and six lockwashers (13).
7.
Remove spacer (14) and gasket (15).
8.
Remove fuel filler strainer element (16) from fuel tank.
Disassembly
1.
Disassemble filler tube grommet assembly (3) by removing eight screws (17), spacer plate (18), gaskets (19 and 20), and
spacer plate (21).
Cleaning
WARNING
Solvents can burn easily, give off harmful vapors, and are harmful to skin and clothing. To avoid injury
or death, keep away from open flame and use in a well-ventilated area. If solvent gets on skin or clothing,
wash immediately with soap and water.
1.
Clean fuel filler strainer element (16) with cleaning compound.
0120 00-2
