TM 9-2350-256-20-1
0120 00
Assembly
NOTE
If replacing gasket (19), cut an approximate 2 inch (in.) (51 millimeter [mm] ) length from gasket using
old gasket as guide.
1.
Assemble filler tube grommet assembly (3) by installing spacer plate (18), two gaskets (19 and 20), spacer plate (21), and
eight screws (17).
Installation
1.
Install fuel filler strainer element (16) into fuel tank.
2.
Install gasket (15) and spacer (14).
3.
Install lower filler tube (10) with gasket (11) by installing six lockwashers (13) and six screws (12).
4.
Connect two air vent lines (9).
5.
Install upper filler tube (4) with gasket (5) by installing six nuts (8), six lockwashers (7), and six screws (6).
6.
Install filler tube grommet assembly (3).
7.
Install fuel filler tube cap assembly (2).
8.
Close fuel fill cover (1).
NOTE
Follow-on maintenance: Install grille doors (see WP 0342 00).
END OF WORK PACKAGE
0120 00-3/4 blank
