TM 9-2350-256-20-1
0122 00
Disassembly
1.
Remove lever (12) from purge pump assembly (4) by removing two cotter pins (13) and two straight pins (14).
2.
Remove lever bracket (15) by removing cotter pin (16) and straight pin (17).
3.
Remove nut (18), lockwasher (19), and handle assembly (20).
4.
Remove screw (21) and lockwasher (22) from handle assembly (20).
5.
Remove bushing (23) and push button (24) from handle assembly (20).
6.
Remove switch (25) from connector (26).
Assembly
1.
Slide switch (25) into connector (26).
2.
Install push button (24) and bushing (23) into handle assembly (20).
3.
Install handle assembly (20) onto connector (26) with lockwasher (22) and screw (21).
4.
Install handle assembly (20) with lockwasher (19) and nut (18).
5.
Install lever (12) to purge pump assembly (4) with two straight pins (14) and two cotter pins (13).
6.
Install lever bracket (15) with straight pin (17) and cotter pin (16).
Installation
1.
Install purge pump assembly (4) to mounting bracket (5) with clamp (8), four lockwashers (7), and four screws (6).
2.
Install clamp (9) with screw (10) and lockwasher (11).
3.
Connect fuel line at coupling (2) and fuel line at nipple (3) to purge pump assembly (4).
4.
Connect two electrical connectors (1).
END OF WORK PACKAGE
0122 00-3/4 blank
