TM 9-2350-256-20-2
0152 00
Removal
1.
Disconnect three cables (1) and ground lead (2) by removing nut (3) and lockwasher (4).
2.
Remove ground lead (2) by removing machine bolt (5) and flat washer (6).
3.
Disconnect two cables (7) by removing nut (8) and lockwasher (9).
4.
Disconnect lead (10) by removing nut (11) and lockwasher (12).
5.
Remove U-bolt (13) by removing two self-locking nuts (14) and two clamping bars (15).
6.
Remove starter (16) and gasket (17) by removing three bolts (18) and three self-locking nuts (19).
7.
Remove starter cradle (20) by removing four screws (21) and four flat washers (22).
8.
Remove starter support (23) by removing three machine bolts (24) and three flat washers (25).
9.
Disconnect connector (26) from starter module (27).
10. Remove starter module (27) by removing two screws (28), four lockwashers (29), and two self-locking nuts (30).
0152 00-2
