TM 9-2350-256-20-2
0158 00
13. Remove wiring harness (31) by removing four screws (32), four lockwashers (33), and four nuts (34).
14. Disassemble connectors (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble connectors (see WP 0255 00 thru 0264 00, as appropriate).
2.
Install wiring harness (31) using four screws (32), four lockwashers (33), and four nuts (34).
3.
Connect six connectors (29) and install two lead assemblies (30).
4.
Install three circuit breakers (25) using two screws (26), two lockwashers (27), and two nuts (28) for each.
5.
Install lamp holder (22) using two screws (23) and two lockwashers (24), and connect connector (21).
0158 00-4
