TM 9-2350-256-20-2
0159 00
18. Remove three connectors (50) by removing four screws (51) and four nuts (52) from each.
19. Remove panel (53) by removing two screws (54).
20. Disassemble wiring harnesses and lead assembly (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harnesses and lead assembly (see WP 0255 00 thru 0264 00, as appropriate).
2.
Install panel (53) using two screws (54).
3.
Install three connectors (50) using four screws (51) and four nuts (52) for each.
4.
Install switch (49) using four screws (48), and connect connector (47).
5.
Install five circuit breakers (40 and 43) using two screws (46), two lockwashers (45), and two nuts (44) for each.
6.
Install lead assembly (42) to three circuit breakers (43), and connect connector (41).
7.
Connect two connectors (39) to two circuit breakers (40).
8.
Install switch guard (36), pull switch (37), nut (35), and connect connector (38).
9.
Connect two connectors (34) to switch (32).
10. Install switch (32), ID plate (31), and switch guard (30) using two screws (33).
11. Connect three connectors (29) to switch (26) and two connectors (28) to two switches (25).
12. Install two switches (25), switch (26), and three ID plates (24) using two screws (27) for each.
0159 00-5
