TM 9-2350-256-20-2
0160 00
13. Remove switch (13) and ID plate (28) by removing two screws (29).
14. Remove gage (17) from front of flasher system panel (1) by removing two nuts (30), two lockwashers (31), and bracket
(32).
15. Remove ID plate (33) and indicator light (11) by removing two screws (34), and two lockwashers (35).
16. Remove thermal flasher (20) by removing two screws (36), two nuts (37), and two lockwashers (38).
17. Remove circuit breaker (15) and disconnect ground lead (39) by removing two screws (40), three lockwashers (41), and
two nuts (42). Remove diode assembly (43).
0160 00-4
