TM 9-2350-256-20-2
0160 00
18. Disassemble wiring harnesses and lead assembly (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Install diode assembly (43). Install circuit breaker (15) and connect ground lead (39) using two screws (40), three lock-
washers (41), and two nuts (42).
2.
Install thermal flasher (20) using two screws (36), two nuts (37), and two lockwashers (38).
3.
Install ID plate (33) and indicator light (11) using two screws (34) and two lockwashers (35).
4.
Install gage (17) to front of flasher system panel (1) using two nuts (30), two lockwashers (31), and bracket (32).
5.
Install switch (13) and ID plate (28) using two screws (29).
6.
Install ID plate (25) and three indicator lights (7 and 9) using two screws (26) and two lockwashers (27).
7.
Install three gaskets (24).
8.
Install four lamps (23) by depressing and turning clockwise.
9.
Install four performed packings (22) and four light lenses (21).
0160 00-5
