TM 9-2350-256-20-2
0163 00
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Install neutral safety switch (2) using four screws (3) and four lockwashers (4).
2.
Connect two connectors (1).
Adjustment
1.
Check adjustment screw (5) on neutral safety switch lever cross shaft (6) for contact with neutral safety switch (7). If the
adjustment screw is not in contact with neutral safety switch, loosen locknut (8) on adjustment screw. Adjust length of
screw until neutral safety switch is engaged. Tighten locknut.
END OF WORK PACKAGE
0163 00-2
