TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
REPAIR RIGGER'S SERVICE LIGHT MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Lockwasher (item 641, WP 0491 00)
Materials/Parts
Nut (item 760, WP 0491 00)
Gasket (item 278, WP 0491 00)
Screws (4) (item 212, WP 0491 00)
Gasket (item 727, WP 0491 00)
Screws (4) (item 213, WP 0491 00)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
burns.
Removal
1.
Disconnect connector (1).
2.
Remove dummy plug (2) and connector (3).
3.
Remove rigger's service headlight (4) by removing nut (5), lockwasher (6), finishing washer (7), and recessed washer (8).
0176 00-1
