TM 9-2350-256-20-2
0187 00
Removal
CAUTION
Ground cables must be disconnected prior to disconnecting positive leads to prevent damage to batteries.
1.
Pull back rubber insulator (3).
2.
Remove lead (1) from battery terminal (4) (see WP 0153 00) by removing bolt (5) and nut (6).
3.
Disconnect connector (2) from circuit breaker (7). Remove lead assembly (8).
Disassembly
1.
Disassemble lead assembly (8) (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble lead assembly (8) (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Install lead (1) at battery terminal (4) (see WP 0153 00) using bolt (5) and nut (6).
2.
Push rubber insulator (3) over battery terminal (4).
3.
Connect connector (2) to circuit breaker (7).
NOTE
Follow-on maintenance: Close air inlet doors (see WP 0205 00).
END OF WORK PACKAGE
0187 00-2
