TM 9-2350-256-20-2
0195 00
12. Disconnect two connectors (11 and 12) from switch panel to gage panel and miscellaneous switches wiring harness (32).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Connect two connectors (11 and 12) to switch panel to gage panel and miscellaneous switches wiring harness (32).
2.
Connect connectors (10) to power control switch (31).
3.
Connect connector (9) to fuel tank transmitter (30).
4.
Install ground lead (8) using bolt (29).
5.
Connect connector (7) to mechanical transmission low oil pressure switch (28).
6.
Install connector (6) and gasket (27) to bulkhead disconnect (22) using three screws (25) and three lockwashers (26).
7.
Install ground lead (5) to bulkhead disconnect (22) using screw (23) and lockwasher (24).
0195 00-5
