TM 9-2350-256-20-2
0201 00
6.
Remove connector (5) from bulkhead disconnect (13) by removing four screws (14), four lockwashers (15), and gasket
(16).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Install connector (5) and gasket (16) to bulkhead disconnect (13) using four screws (14) and four lockwashers (15).
2.
Connect connector (4) to heater control box (12).
3.
Connect connector (3) to fire extinguisher interlock switch (11).
4.
Connect connector (2) to headlight and dimmer switch wiring harness (10).
5.
Connect connector (1) to main switch panel (9).
6.
Install 24 clamps (6) using lockwasher (8) and screw (7) for each.
NOTE
Follow-on maintenance: Install air cleaner assembly (see WP 0137 00).
END OF WORK PACKAGE
0201 00-4