TM 9-2350-256-20-2
0210 00
4.
Remove two connectors (3 and 4) from starter (13) by removing nut (14) and lockwasher (15).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Install two connectors (3 and 4) to starter (13) using new lockwasher (15) and nut (14).
2.
Connect connector (2) to fuel solenoid wiring harness (8).
3.
Connect connector (1) to engine disconnect (8) using four nuts (11), four new lockwashers (10), and four screws (9).
4.
Install clamp (5) using new lockwasher (7) and screw (6).
NOTE
Follow-on maintenance: Install powerplant (see WP 0098 00).
END OF WORK PACKAGE
0210 00-3/4 blank
