TM 9-2350-256-20-2
0245 00
Removal
1.
Disconnect connector (1) from solenoid drain valve (3).
2.
Disconnect connector (2) from fuel/water separator control module (4).
3.
Remove clamp (5) by removing screw (6) and washer (7).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Install clamp (5) using washer (7) and screw (6).
2.
Connect connector (2) to fuel/water separator control module (4).
3.
Connect connector (1) to solenoid drain valve (3).
NOTE
Follow-on maintenance: Install engine deck (see WP 0336 00).
END OF WORK PACKAGE
0245 00-2
