TM 9-2350-256-20-2
0243 00
Removal
1.
Remove six clamps (6) by removing screw (7) and lockwasher (8) from each.
2.
Disconnect connector (1) from driver's vehicle exhaust smoke disconnect bracket (9).
3.
Disconnect four connectors (2 through 5) from commander's smoke activating switch (10).
Disassembly
1.
Disassemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Assembly
1.
Assemble wiring harness (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Connect four connectors (2 through 5) to commander's smoke activating switch (10).
2.
Connect connector (1) to driver's vehicle exhaust smoke disconnect bracket (9).
3.
Install six clamps (6) using screw (7) and lockwasher (8) for each.
END OF WORK PACKAGE
0243 00-3/4 blank