TM 9-2350-256-20-2
0242 00
Assembly
1.
Assemble wiring harness and lead (see WP 0255 00 thru 0264 00, as appropriate).
Installation
1.
Connect connector (9) to driver's vehicle exhaust smoke disconnect bracket (20) using four screws (21), four lockwashers
(22), and four nuts (23).
2.
Connect connector (8) to driver's vehicle exhaust smoke indicator light (19).
3.
Connect four connectors (4 through 7) to driver's vehicle exhaust smoke switch (18).
4.
Connect Y-connector (3) to switch panel to gage panel and miscellaneous switches wiring harness (16) and connector (17).
5.
Connect Y-connector (2) to gage panel to bulkhead wiring harness (14) and connector (15).
0242 00-4
