TM 9-2350-256-20-2
0344 00
Removal
1.
Remove exhaust deflector (1) by removing screw (2) and lockwasher (3) from each of three hinges (4). Unlatch two levers
(5) at top end by removing nut (6), lockwasher (7), and flat washer (8) from each.
2.
Remove two levers (5) by removing cotter pin (9), pin (10), and two flat washers (11) from each side.
3.
Remove three hinges (4) from exhaust deflector (1) by removing two screws (12), two lockwashers (13), and two nuts (14)
from each.
Installation
1.
Install three hinges (4) to exhaust deflector (1) with two screws (12), two lockwashers (13), and two nuts (14) on each.
2.
Install two levers (5) to exhaust deflector (1) with cotter pin (9), pin (10), and two flat washers (11) on each.
3.
Install exhaust deflector (1) with three screws (2) and three lockwashers (3). Latch two levers (5) at top end with flat washer
(8), lockwasher (7), and nut (6) on each.
END OF WORK PACKAGE
0344 00-2
