TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
AIR INLET DOORS REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool kit, general mechanic's (item 59, WP 0490 00)
Pins, straight (10) (item 306, WP 0491 00)
Screws (5) (item 413, WP 0491 00)
Materials/Parts
Washers, flat (5) (item 539, WP 0491 00)
Pins, cotter (10) (item 526, WP 0491 00)
Washers, flat (10) (item 543, WP 0491 00)
NOTE
Removal and installation procedures are the same for all five sets of air inlet doors.
Removal
1.
Remove lock (1), screw (2), and flat washer (3).
2.
Remove two cotter pins (4), two flat washers (5), two straight pins (6), and two air inlet doors (7).
Installation
1.
Install two air inlet doors (7) each with straight pin (6), flat washer (5), and cotter pin (4).
2.
Install lock (1) with screw (2) and flat washer (3).
END OF WORK PACKAGE
0341 00-1/2 blank
