TM 9-2350-256-20-2
0352 00
11. Insert hollow threaded rod (27) into each of two spacers (29), one in adjuster assembly (28) and one in retainer assembly (3).
12. Place springs (30 and 23) over rods (27) and spacers (29) and install as shown.
NOTE
When installing retainer assembly (3), be sure spring (23) ends of upper set are behind edge of support
assembly (24) and in contact with seat pan (18).
13. Install retainer assembly (3) on support assembly (24) with four screws (25) and four lockwashers (26).
14. Install seat pan (18) with nut (19), lockwasher (20), two nuts (21), and two lockwashers (22).
15. Install support (13) to backrest (14) with screw (17), lockwasher (16), and wing nut (15).
0352 00-9