TM 9-2350-256-20-2
0359 00
Disassembly
1.
Remove cotter pin (1) and straight pin (2) from control lever (3).
2.
Remove control lever (3) with spring (4).
3.
Remove retaining ring (5) and washer (6).
4.
Pull housing assembly (7) from steering column (8).
5.
Remove steering wheel (9) from steering column (8) by removing three screws (10) and three lockwashers (11).
6.
Remove connectors (12) from horn switch assembly (13) and pull horn switch assembly out of steering column (8).
7.
Remove two cotter pins (14), pin (15), bell crank (16), two spacers (17), two washers (18), and spring (19) from housing
assembly (7).
Assembly
1.
Install spring (19), two washers (18), two spacers (17), bell crank (16), pin (15), and two cotter pins (14) to housing assembly
(7).
2.
Pull horn switch assembly (13) wires through steering column (8). Install connectors (12) to horn switch assembly.
3.
Install steering wheel (9) to steering column (8) with three screws (10) and three lockwashers (11).
4.
Install steering column (8) to housing assembly (7).
5.
Install washer (6), retaining ring (5), spring (4), and control lever (3).
6.
Install straight pin (2) and cotter pin (1).
Installation
1.
Install steering control assembly (see WP 0357 00).
END OF WORK PACKAGE
0359 00-2
