TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
STEERING CONTROLS AND LINKAGES MAINTENANCE
REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 59, WP 0490 00)
Screws (4) (item 397, WP 0491 00)
Pliers, retaining ring (item 36, WP 0490 00)
Screws (2) (item 401, WP 0491 00)
Screws (18) (item 402, WP 0491 00)
Materials/Parts
Screws (4) (item 403, WP 0491 00)
Bearings (2) (item 433, WP 0491 00)
Screws (3) (item 415, WP 0491 00)
Bearings (4) (item 470, WP 0491 00)
Seals (6) (item 235, WP 0491 00)
Bolts (2) (item 11, WP 0491 00)
Washer, flat (item 537, WP 0491 00)
Bolts (6) (item 339, WP 0491 00)
Washers, flat (5) (item 540, WP 0491 00)
Boot, rubber (item 34, WP 0491 00)
Clamp (item 344, WP 0491 00)
Equipment Condition
Keys (2) (item 138, WP 0491 00)
Powerplant removed (see WP 0098 00)
Lockwashers (3) (item 350, WP 0491 00)
Left-side air cleaner removed (see WP 0137 00)
Lockwashers (21) (item 640, WP 0491 00)
Cab subfloor plates removed (see WP 0286 00 thru 0308
Nuts (18) (item 682, WP 0491 00)
00)
Pin, cotter (item 108, WP 0491 00)
Air inlet doors removed as necessary (see WP 0341 00)
Pin, cotter (item 520, WP 0491 00)
Air inlet grilles removed as necessary (see WP 0342 00)
Pin, straight (item 708, WP 0491 00)
Ammunition rack removed (see WP 0386 00)
Pin, straight (item 710, WP 0491 00)
Toolbox rack removed (see WP 0389 00)
Retainers (2) (item 845, WP 0491 00)
Oddment tray removed (see WP 0390 00)
Rings, retaining (2) (item 461, WP 0491 00)
NOTE
Only remove or open items necessary to gain access to area of linkage requiring removal.
0357 00-1
