TM 9-2350-256-20-2
0356 00
Cleaning
WARNING
Solvents can burn easily, give off harmful vapors, and are harmful to skin and clothing. To avoid injury
or death, keep away from open flame and use in well-ventilated area. If solvent gets on skin or clothing,
wash immediately with soap and water.
WARNING
Particles blown by compressed air can be dangerous. Be certain to direct airstream away from yourself
and other personnel in the area. Compressed air used for cleaning will not exceed 30 psi (207 kPa). Use
only with effective chip-guarding and personal protective equipment (goggles/shield and gloves).
1.
Clean dirt and other foreign materials from flexible shafts. Thoroughly wipe core tips with lint-free rags saturated with
dry-cleaning solvent. Wash rubber tubing with clean water; rinse and dry.
2.
Clean other parts with cleaning compound and dry with compressed air.
Inspection-Acceptance and Rejection Criteria
1.
Inspect flexible shafts for cracking or fraying of rubber cover and for inner damage. Check for excessive flexibility at any
point along length of tubing.
2.
Inspect core tips for nicks and distortion.
3.
Inspect all threaded parts for cross threading and nicks.
4.
Inspect clamps, bracket, and welded pad and plate for cracks, distortion, and breakage. Replace all damaged parts. If
welded pad and plate are damaged, notify Direct Support.
Installation
1.
Install bracket (25) with four screws (29) and four lockwashers (30). Secure four screws with lockwire (28).
2.
Install adapter assembly (21) on bracket (25) with two screws (26) and two lockwashers (27).
0356 00-4
