TM 9-2350-256-20-2
0357 00
Removal
1.
Disconnect two electrical leads (1).
2.
Remove cotter pin (2) and straight pin (3).
3.
Remove cotter pin (4) and straight pin (5).
4.
Remove steering control assembly (6) by removing four screws (7) and four lockwashers (8).
5.
Remove connecting link (9) by removing screw (10) and lockwasher (11).
6.
Disconnect and remove two lubrication tubes (12 and 13), two elbows (14), two adapters (15), and two fittings (16).
7.
Disconnect connecting link (17) from lever (18) by removing screw (19) and lockwasher (20).
8.
Remove bracket (21) and bearing housing (22) by removing two screws (23) and two lockwashers (24).
9.
Remove bearing housing (25) by removing two screws (26) and two lockwashers (27).
10. Slide two bearing housings (22 and 25) and washer (28) from shaft assembly (29).
0357 00-2
