TM 9-2350-256-20-2
0357 00
18. Loosen nut (50) and unscrew rod end bearing (45) from connecting link (51). Remove nut.
19. Remove screw (52) and lockwasher (53).
20. Pry rubber bellows (54) loose from bulkhead (55) and pull connecting link (51) from bulkhead.
21. Remove rubber bellows (54) from connecting link (51) by removing clamp (56) and bushing (57).
22. Remove connecting links (58, 59, and 60) by removing screw (61) and lockwasher (62) from ends of each connecting link.
23. Remove two bell crank assemblies (63 and 64) from mounting brackets (65 and 66) by removing two retaining rings (67
and 68), four lubrication fittings (69 and 70), and two grooved pins (71).
24. Remove two bell cranks (72 and 36) by removing lubrication fitting (73), bolt (74), lockwasher (75), and flat washer (76)
from each.
25. Remove screw (77), lockwasher (78), and lever (79).
0357 00-6
