TM 9-2350-256-20-2
0357 00
26. If necessary, remove nut (80) and bearing (81) from each end of connecting links (9, 17, 39, 51, 58, 59, and 60).
27. If necessary, remove two nuts (82) and two clevis assemblies (83) from tube assembly (42).
28. Remove mounting bracket (65) by removing three screws (84), three lockwashers (85), and flat washer (86).
Disassembly
1.
Remove two seals (87) and two bearings (88) from each of two bell cranks (89).
Assembly
1.
Install two seals (87) and two bearings (88) to each of two bell cranks (89).
Installation
1.
Install mounting bracket (65) with three lockwashers (85), flat washer (86), and three screws (84).
2.
If removed, install two clevis assemblies (83) and two nuts (82) to tube assembly (42).
3.
If removed, install bearing (81) and nut (80) to each end of connecting links (9, 17, 39, 51, 58, 59, and 60).
0357 00-8
