TM 9-2350-256-20-2
0357 00
7.
Install each end of connecting links (58, 59, and 60) with lockwasher (62) and screw (61).
NOTE
Linkages must be completely installed and aligned and rubber bellows must be adjusted (see WP 0358
8.
Install rubber bellows (54) on connecting link (51) with bushing (57) and clamp (56).
9.
Insert connecting link (51) through bulkhead (55).
10. Connect end of connecting link (51) to bell crank assembly (72) with lockwasher (53) and screw (52).
11. Install rod end bearing (45) to connecting link (51) with nut (50).
0357 00-10
