TM 9-2350-256-20-2
0361 00
16. Remove tube assembly (51) by removing screw (52) and lockwasher (53). Remove bearing (54) and nut (55) from each
end of tube assembly.
17. Remove tube assembly (56) by removing screw (57) and lockwasher (58). Remove bearing (59) and nut (60) from each
end of tube assembly.
18. Remove six bolts (61) and six rollers (62).
19. Remove screw (63) and lockwasher (64).
20. Loosen nuts (65) and unscrew rod end bearings (66) from tube assembly (67). Remove nuts from each end of tube assembly.
21. Pry rubber boot (68) from bulkhead (69) and pull tube assembly (67) from bulkhead.
22. Remove rubber boot (68) from tube assembly (67) by removing clamp (70) and bushing (71).
23. Remove tube assemblies (72, 73, and 74) by removing screw (75) and lockwasher (76) from ends of each tube assembly.
24. Remove bearing (77) and nut (78) from each end of tube assemblies (72, 73, and 74).
25. Remove two bell crank assemblies (79) from mounting brackets (80 and 81) by removing two retaining rings (82), four
lubrication fittings (83 and 84), and two grooved pins (85).
26. Remove bell crank assembly (86) by removing lubrication fitting (87), bolt (88), lockwasher (89), and flat washer (90).
27. Remove screw (91), lockwasher (92), and lever (93).
0361 00-6
