TM 9-2350-256-20-2
0361 00
3.
Remove straight pin (105) and lever (106).
4.
Remove screw (107), lockwasher (108), lever (25), and key (109).
5.
Remove straight pin (110), shaft (111), segment assembly (112), and bearing unit (113).
6.
Remove setscrew (114), spring (115), and plunger (116).
7.
Remove seal (117) and two bearings (118).
8.
If necessary, remove two lubrication fittings (119) from base (120) and fitting (121) from bearing unit (113).
9.
Remove two seals (122) and two bearings (123) from each of two bell cranks (124).
0361 00-9
