TM 9-2350-256-20-2
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MAIN WINCH LEVEL WINDER CYLINDER ADJUSTMENT
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (item 59, WP 0490 00)
Cab subfloor plates removed as necessary (see WP 0287
Wrench, spanner, hydraulic cylinder (item 64, WP 0490
Wrench, spanner, level winder adjusting nut (item 65, WP
Adjustment
CAUTION
Reel in cable under a load heavy enough to keep cable tightly drawn and off ground. Do not reel in cable
under load in high gear.
1.
Remove lockplate (1) by removing two screws (2) on level winder cylinder (3).
2.
Loosen and slide back packing gland nut (4) using wrench (5).
0404 00-1
