TM 9-2350-256-20-2
0446 00
12. Remove four clamps (28) by removing four screws (29).
13. Remove tube assembly (23) by disconnecting from elbow (30).
Installation
1.
Install bulkhead elbow (22) and flat washer (24) to shroud bracket (25) with lockwasher (26) and locknut (27).
2.
Install tube assembly (23) by connecting at bulkhead elbow (22) and elbow (30).
3.
Secure tube assembly (23) with four clamps (28) and four screws (29).
4.
Install tube assembly (20) by connecting to elbow (21) and bulkhead elbow (22).
5.
Secure tube assembly (23) to gear housing cover (17) with clamp (16), screw (18), and flat washer (19).
6.
Install tube assembly (6) onto left exhaust manifold tube (15) and secure tube assembly with clamp (12), bolt (13), and nut
(14).
0446 00-3
