TM 9-2350-256-20-2
0445 00
3.
Install elbow (17) into remaining solenoid valve (2) outlet port with connection end of elbow at 12 o'clock position.
4.
Install elbow (18) into remaining solenoid valve (2) inlet port with connection end of elbow at 4 o'clock position.
5.
Install adapter (10) to elbow (18).
6.
Mount solenoid valves (2) on mounting bracket (11) with four flat washers (15) and four bolts (14).
7.
Install mounting bracket (11) with two bolts (12) to engine lifting eye (13).
8.
Position fuel line (8) and tighten nut (9) at adapter (10).
9.
Connect fuel tube assembly (16) to elbow (17).
10. Position fuel tube assembly (16) and tighten nut (6) at elbow (7).
11. Connect ground lead (3) with screw (4) and self-locking nut (5).
12. Connect two cable assemblies (1) to two solenoid valves (2).
WARNING
Move vehicle out of building before attempting to check system for operation/leaks and extinguish all
open flames in the immediate area. Refer to TM 9-2350-256-10 for operating procedures.
13. Check all connections to ensure tightness.
NOTE
Follow-on maintenance: Install engine deck (see WP 0336 00).
END OF WORK PACKAGE
0445 00-3/4 blank
