TM 9-2350-256-20
Connector No.
Electrical Lead To:
Wire No.
1
Flasher assembly
2
Ground
GND
3
Directional signal control wiring harness (12322611)
A
4
Directional signal control wiring harness (12322611)
B
a. REMOVAL
1
Disconnect connector (1) from flasher (5).
2
Disconnect ground lead (2) by removing screw (6) and two lockwashers (7).
3
Disconnect two connectors (3 and 4).
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section
VI).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1
Connect two connectors (3 and 4).
2
Connect ground lead (2) using screw (6) and two new lockwashers (7).
3
Connect connector (1) to flasher (5).
H— 13
