SECTION II: EQUIPMENT DESCRIPTION AND DATATM 9-2350-256-20d.PAINTING AND RESTENCILING MARKINGSStenciled markings must be renewed periodically because of weathering or repainting. To restencil markings, paintlusterless black on forest green background. U.S. Army and vehicular registration markings are approximately 3 in. (76mm) high in block, Gothic, capital letters. Locational marking letters (such as: Tow Bar, Tie Down, etc.) are 1/2 in. (13mm) high (within 1.16 in. [29.5 mm] ), 3/32 in. (2.4 mm) wide (within 1/32 in. [0.8 mm] ), and spaced 1/4 in. (6.4 mm)between lines. Refer to the locator view (Figure 1-4) for required stenciled markings and location of lettering positions.Instructions for the preparation of the materiel for painting, methods of painting, and materials to be used are containedin TM 43-0139 and AR 746-1. Instructions for camouflage painting are contained in FM 5-20. See Chapter 2 forinstructions on painting fender walkways.1-7
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
