TM 9-2350-256-20
CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
6-58 REPLACE/REPAIR ENGINE WIRING HARNESS (DUAL VOLTAGE)
(1167241 6Continued
17 Disconnect connector (21) from transmission high
oil temperature sending unit (52).
18 Disconnect connector (23) from transmission high
oil temperature switch (53).
19 Disconnect connector (24) from generator blower
motor (54).
20 Remove ground lead (22) by removing screw (55)
and two lockwashers (56).
21 Disconnect connector (25) from module auto water
drain (57).
22 Remove ground lead (20) by removing screw (58),
clamp (59), and two lockwashers (60).
23 Disconnect two connectors (26 and 27) from
module starter wiring harness (61).
b. DISASSEMBLY
Disassemble wiring harness (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble wiring harness (see Chapter 6, Section VII).
d. INSTALLATION
1
Connect two connectors (26 and 27) to module
starter wiring harness (61).
2 Connect connector (25) to module auto water drain (57).
6-144
