TM 9-2350-256-20CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS6-69 REPLACE/REPAIR MAIN LIGHTING AND B.O. SELECTOR SWITCH WIRINGHARNESS (11671796)-Continued3 Disconnect two connectors (13 and 14) from B.O.selector switch (18).4 Remove connector (15) from panel outlet (19) byremoving four screws (20) and four nuts (21).b. DISASSEMBLYDisassemble wiring harness (see Chapter 6, Section VII).c. ASSEMBLYAssemble wiring harness (see Chapter 6, Section VII).d. INSTALLATION1 Install connector (15) to panel outlet (19) using fourscrews (20) and four nuts (21).2 Connect two connectors (13 and 14) to B.O. selectorswitch (18).3 Connect five connectors (8 through 12) to main lighting and master relay wiring harness (17).4 Connect seven connectors (1 through 7) to five circuit breakers (16).NOTEFollow-on maintenance: Install main switch panel (see paragraph 6-10)6-178
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
