SECTION II: HULL AND CAB COMPONENTS
TM 9-2350-256-20
9-33 REPLACE LEFT AND RIGHT PERSONNEL DOORS
THIS TASK COVERS
a.
Removal
b. Installation
INITIAL SET-UP
Tools:
Material/Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
•Washers, spring (2) (Appendix G, item 279)
Material/Parts:
Personnel Required:
•Adhesive (Appendix D, item 3)
Two
•Lockwashers (8) (Appendix G, item 130)
•Lockwashers (16) (Appendix G, item 134)
Equipment Condition:
•Pins, cotter (2) (Appendix G, item 216)
Door-mounted liquid container bracket removed
•Strips, rubber (2) (Appendix G, item 272)
(see paragraph 9-106)
NOTE
Removal and installation procedures are the same for both left and right personnel doors.
a.
REMOVAL
1
Remove chain (1) and S-hook (2) from quick-
release pin (3).
2
Remove quick-release pin (3) from door handle
latch (4).
3
Remove door handle latch (4) by removing cotter
pin (5), nut (6), and washer (7). Remove spring
washer (8) and two flat washers (9).
4
Remove door handle (10) from personnel door (11).
5
Remove rubber strip (12) from personnel door (11).
Clean all dirt and adhesive from opening.
9-57
