SECTION II: HULL AND CAB COMPONENTS
TM 9-2350-256-20
b.
INSTALLATION
1
Install two hinge leafs (25) with two shims (18), eight new lockwashers (20), and eight screws (19).
2
Install personnel door (11) with torsion bar (22), tube (23), control cam (21), and expansion plug (24).
3
Install lubrication fitting (26).
NOTE
Position door halfway open to relieve stress on torsion bar prior to installing retainer. Secure door in
position.
4
Install lubrication fitting (16) and torsion bar retainer (13) with four new lockwashers (15) and four screws (14).
5
Install new rubber strip (12) on personnel door (11) by applying adhesive and pressing strip in place. Allow adhesive
to dry before closing personnel door.
6
Install door handle (10) and door handle latch (4) with two flat washers (9), spring washer (8), washer (7), nut (6), and
new cotter pin (5).
9-59
