CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-38 REPLACE/REPAIR PASSIVE NIGHT VIEWER MOUNT AND RELATED PARTS--Continued
3
Remove packing (12) and setscrew (13) from access
cover (8).
4
Remove lever (14) from access cover (8) by removing
three screws (15) and three flat washers (16).
5
Remove access door (17) from access cover (8) by
removing straight pin (18).
6
Remove gasket (19) from access door (17).
c.
ASSEMBLY
1
Install new gasket (19) in access door (17).
2
Install access door (17) on access cover (8) with
straight pin (18).
3
Install lever (14) with three flat washers (16) and three
screws (15).
4
Install new packing (12) and setscrew (13) in access
cover (8).
5
Install two brackets (10) with two screws (11).
NOTE
Apply adhesive around tapped holes in mount
assembly. Remove excess adhesive from
inside of holes if necessary.
6
Install access cover (8) on mount assembly (1) with
two screws (9).
9-64