SECTION II: HULL AND CAB COMPONENTSTM 9-2350-256-20NOTESteps 3 through 6 apply to basic design vision prism; steps 7 through 10 apply to later design.3Remove lockwire (6).4Remove two outer screws (7) from wedge plate (8).5Remove wedge plate (8) and vision prism (9) by turning center screw (10) counterclockwise until removed.6Remove seal (11) and all remaining sealing compound from vision prism (9).9-67
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business