CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-52 REPLACE/REPAIR RIGHT ENGINE DECK DOOR
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
Screws (2) (Appendix G, item 240)
Washers, spring (2) (Appendix G, item 278)
Parts:
Lockwashers (10) (Appendix G, item 107)
Personnel Required:
Lockwashers (4) (Appendix G, item 132)
Two
a. REMOVAL
1
Remove two screws (1) and two lockwashers (2) from engine deck cover (3).
2
Remove torsion bar support (4) by removing two screws (5) and two lockwashers (6).
3
Remove tube (7) and torsion bar (8).
4
Remove door (9) from vehicle.
5
Remove two handles (10) from door (9) by removing nut (11), spring washer (12), and two flat washers (13) from
each.
6
Remove bracket mounting (14) from door (9) by removing 10 screws (15) and 10 lockwashers (16).
7
Remove six seals (17) and insulation blanket (18) from door (9) and remove six seals (19) from door opening (20)
on vehicle.
NOTE
Optional door does not have studs (21) or spacers (22).
8
Remove 10 studs (21) and 10 spacers (22).
9-96
