SECTION III: ENGINE DECK, COVERS, GRILLES, AND DOORS
TM 9-2350-256-20
b. DISASSEMBLY
Remove lubrication fitting (23) from each handle (10).
c. ASSEMBLY
Install lubrication fitting (23) to each handle (10).
d. INSTALLATION
1
Install 10 studs (21) and 10 spacers (22) to door (9).
2
Install six seals (17) and insulation blanket (18) to
door (9) and install six seals (19) to door opening (20)
on vehicle.
3
Install bracket mounting (14) to door (9) with 10 screws (15) and 10 new lockwashers (16).
4
Install two handles (10) to door (9) with two flat washers (13), new spring washer (12), and nut (11) each.
5
Install door (9) to vehicle.
NOTE
Door (9) must be open to set torsion bar (8) and torsion bar support (4).
6
Install tube (7) and torsion bar (8).
7
Install torsion bar support (4) with two screws (5) and two new lockwashers (6).
8
Install two new lockwashers (2) and two screws (1) to engine deck cover (3). Peen screws.
9-97
