TM 9-2350-256-34
0028 00
4.
Install transmission guide rail brace (38) and four screws (37).
5.
Move fuel line (36) into position.
NOTE
Refer to TM 9-2350-256-20 for alignment of brake control rod.
6.
Connect brake control rod (33) and install pin (35) and cotter pin (34).
7.
Install brake control rod (33), pin (32), and cotter pin (31).
8.
Install three washers (30), bolts (tank mounting) (29), washers (28), lockwasher (27), ground strap (26), three lockwashers
(25), and nuts (24).
9.
Install clamp (23), two lockwashers (22), and screws (21).
0028 00-6
